{"title":"Radius Rods","description":"\u003cp\u003eHeavy-duty CNC billet aluminum radius rods for Polaris RZR and Can-Am X3. Direct bolt-on replacement for stock radius rods.\u003c\/p\u003e","products":[{"product_id":"1066-can-am-maverick-x3-heavy-duty-radius-rods","title":"Can-Am Maverick X3 Heavy Duty Radius Rods","description":"\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003eHeavy Duty Radius Rod Kit for Can-Am X3 (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur heavy duty rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. Stiffer, stronger and lighter than stock. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your X3, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- (6) Solid 6061 Billet Aluminum Upper and Lower Radius Rods\u003cbr\u003e- (12) 5\/8\" Chromoly Heim Joints \u0026amp; jam nuts 6RH 6LH\u003cbr\u003e- (24) High Misalignment Spacers\u003cbr\u003e- CNC Engraved Logo on middle rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- Lifetime Warranty on Rods (1 Year warranty on heims)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2018 Can-Am Maverick X3 models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Make sure you verify which model and width you have before ordering!\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e64\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e- X3 900 HO \u003cbr\u003e- X3 Turbo\u003cbr\u003e- X3 Turbo R\u003cbr\u003e- X3 X DS Turbo R\u003cbr\u003e- X3 X RC Turbo\u003cbr\u003e- X3 X MR Turbo\u003cbr\u003e- X3 Max Turbo\u003cbr\u003e- X3 Max Turbo R \u003cbr\u003e- X3 Max X DS Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e72\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e- X3 Max X RS Turbo R\u003cbr\u003e- X3 X RS Turbo R\u003cbr\u003e- X3 X RC Turbo R\u003cbr\u003e- X3 X MR Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: There are 2 different widths, and they are not interchangeable! If you do not know which model you have, you can measure the track width. It should be either 64\" or 72\" on stock wheel backspacing.\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003eWhy do I need these rods? 50 Caliber Racing's Heavy Duty Radius Rods were designed to address the weakest link in the X3 rear suspension design. The stock rods are weak and will fail for many of you Can-Am customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"64\" Wide \/ BLACK","offer_id":51840898892077,"sku":"RRX364CB","price":479.99,"currency_code":"USD","in_stock":true},{"title":"64\" Wide \/ RAW","offer_id":51840898924845,"sku":"RRX364C","price":439.99,"currency_code":"USD","in_stock":true},{"title":"72\" Wide \/ BLACK","offer_id":51840898957613,"sku":"RRX372CB","price":479.99,"currency_code":"USD","in_stock":true},{"title":"72\" Wide \/ RAW","offer_id":51840898990381,"sku":"RRX372C","price":439.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/10383.jpg?v=1771874691"},{"product_id":"1122-xp-turbo-cnc-billet-radius-rods","title":"XP Turbo CNC Billet Radius Rods","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Radius Rod Kit for RZR XP Turbo (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total)\u003cbr\u003e- (8) 5\/8\" Heim Joints \u0026amp; jam nuts 4RH 4LH - 4130 Chromoly with PTFE liner\u003cbr\u003e- (16) High Misalignment Spacers\u003cbr\u003e- CNC Engraved Logo on the upper rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- 2 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e IMPORTANT NOTES:\u003c\/strong\u003e\u003cbr\u003e- There is a difference between years, so make sure you specify year from drop down before ordering!\u003cbr\u003e- These rods \u003cstrong\u003ewill not fit Turbo S models \u003c\/strong\u003e\u003cbr\u003e- All 4 heim joints are right hand thread which makes it impossible for rod to completely unscrew itself from the machine if the lock nuts were to come loose \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePart # RR1000 \/ RR1000CB\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- XP Turbo (2016)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePart # 5317A3 \/ 5317A4\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- XP Turbo (2017-2021) \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"2016 \/ BLACK","offer_id":51840906035501,"sku":"RR1000CB","price":369.99,"currency_code":"USD","in_stock":false},{"title":"2016 \/ RAW","offer_id":51840906068269,"sku":"RR1000","price":349.99,"currency_code":"USD","in_stock":false},{"title":"2017-2021 \/ BLACK","offer_id":51840906101037,"sku":"5317A4","price":369.99,"currency_code":"USD","in_stock":false},{"title":"2017-2021 \/ RAW","offer_id":51840906133805,"sku":"5317A3","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/8189.jpg?v=1771874731"},{"product_id":"1123-rzr-turbo-s-cnc-billet-radius-rods","title":"RZR Turbo S CNC Billet Radius Rods","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Radius Rod Kit for RZR Turbo S (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch chromoly heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 billet aluminum upper and lower radius rods (4 total)\u003cbr\u003e- (8) 5\/8\" Heim joints \u0026amp; jam nuts 4RH 4LH - 4130 chromoly with teflon \/ kevlar liners\u003cbr\u003e- (16) High misalignment Spacers\u003cbr\u003e- CNC engraved logo on the upper rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- 2 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIMPORTANT NOTES:\u003c\/strong\u003e\u003cbr\u003e- These rods are for 72\" wide machines. They do not fit XP Turbo or XP1000 models\u003cbr\u003e- All 4 heim joints are right hand thread which makes it impossible for rod to completely unscrew itself from the machine if the lock nuts were to come loose \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Part #s: 5217A1 (raw) \/ 5217A2 (black)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- Polaris RZR Turbo S (2018-2019) with 72\" wide suspension\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"2018-2019 \/ BLACK","offer_id":51840906199341,"sku":"5317A2","price":369.99,"currency_code":"USD","in_stock":false},{"title":"2018-2019 \/ RAW","offer_id":51840906232109,"sku":"5317A1","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/8199.jpg?v=1771874732"},{"product_id":"1167-2020-rzr-pro-xp-cnc-billet-radius-rods","title":"2020 RZR PRO XP CNC Billet Radius Rods","description":"\u003cp\u003e\u003cstrong\u003eHeavy Duty Radius Rod Kit for RZR PRO XP 2020+ (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total)\u003cbr\u003e- (8) 5\/8\" Heim Joints \u0026amp; jam nuts 4RH 4LH - Heat treated 4130 Chromoly\u003cbr\u003e- (16) High Misalignment Spacers\u003cbr\u003e- CNC Engraved Logo on the upper rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- 2 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e IMPORTANT NOTES:\u003c\/strong\u003e\u003cbr\u003e- Fits PRO XP models only. Will not fit XP1000 or XP Turbo.\u003cbr\u003e- All 4 heim joints are right hand thread which makes it impossible for rod to completely unscrew itself from the machine if the lock nuts were to come loose \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RZR  PRO XP (2020+)\u003cbr\u003e- RZR PRO XP4 (2020+)\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"BLACK","offer_id":51840911180077,"sku":"5317A6","price":369.99,"currency_code":"USD","in_stock":true},{"title":"RAW","offer_id":51840911212845,"sku":"5317A5","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/8625.jpg?v=1771874755"},{"product_id":"1298-2022-rzr-pro-r-cnc-billet-radius-rods","title":"2022+ RZR PRO R CNC Billet Radius Rods","description":"\u003cp\u003e\u003cstrong\u003eHeavy Duty Radius Rod Kit for RZR PRO R \/ Turbo R 2022+ (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 3\/4 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total)\u003cbr\u003e- (8) 3\/4\" Heim Joints \u0026amp; jam nuts 4RH 4LH - Heat treated 4130 Chromoly\u003cbr\u003e- (16) High Misalignment Spacers\u003cbr\u003e- CNC Engraved Logo on the upper rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- 2 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e IMPORTANT NOTES:\u003c\/strong\u003e\u003cbr\u003e- All 4 heim joints are right hand thread which makes it impossible for rod to completely unscrew itself from the machine if the lock nuts were to come loose \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RZR  PRO R (2022+)\u003cbr\u003e- RZR PRO R 4 (2022+)\u003cbr\u003e\u003cspan\u003e- RZR  Turbo R (2022+)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- RZR Turbo R 4 (2022+)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"BLACK","offer_id":51840925892909,"sku":"5317A8","price":429.99,"currency_code":"USD","in_stock":true},{"title":"RAW","offer_id":51840925925677,"sku":"5317A7","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/10848.jpg?v=1771874830"},{"product_id":"794-polaris-rzr-xp1000-heavy-duty-radius-rods","title":"Polaris RZR XP1000 Heavy Duty Radius Rods","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Radius Rod Kit for RZR XP1000 (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total)\u003cbr\u003e- (8) 5\/8\" Heim Joints \u0026amp; jam nuts 4 LH \u0026amp; 4 RH - 4130 Chromoly with PTFE liner\u003cbr\u003e- (16) High Misalignment Spacers (4 different sizes - 4 of each)\u003cbr\u003e- CNC Engraved Logo on the upper rods only\u003cbr\u003e- Available in raw finish or powdercoat\u003cbr\u003e- 2 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIMPORTANT Notes:\u003c\/strong\u003e\u003cbr\u003e- Polaris changed the bolt size midyear in 2017. \u003cstrong\u003eBolt size must MUST be verified before ordering!\u003c\/strong\u003e\u003cbr\u003e- 2014 through 2016 and some 2017 uses 10mm diameter bolts and use a 15mm size wrench.\u003cbr\u003e- 2017.5 - up uses 12mm diameter bolts and use an 18mm wrench. \u003cbr\u003e- All 4 heims joints are right hand threads which makes it impossible for rod to completely unscrew itself from the machine if the lock nuts were to come loose. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePart #s:  RR1000 \/ RR1000CB  (10mm bolt size)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- XP 1000 (2014-2017.5)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePart #s: RR1000C17\/ RR1000C17B  (12mm bolt size)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- XP 1000 (2017.5-2023)\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"2014 - 2016 \/ BLACK","offer_id":51840938737965,"sku":"RR1000CB","price":369.99,"currency_code":"USD","in_stock":false},{"title":"2014 - 2016 \/ RAW","offer_id":51840938770733,"sku":"RR1000","price":349.99,"currency_code":"USD","in_stock":false},{"title":"2017.5-2023 \/ BLACK","offer_id":51840938803501,"sku":"RR1000C17B","price":369.99,"currency_code":"USD","in_stock":false},{"title":"2017.5-2023 \/ RAW","offer_id":51840938836269,"sku":"RR1000C17","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/7249.jpg?v=1771874898"},{"product_id":"814-polaris-rzr-xp-900-heavy-duty-radius-rods","title":"Polaris RZR XP 900 Heavy Duty Radius Rods","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Radius Rod Kit for RZR XP900 (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch steel heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RZR, you need these rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total) 15.75\" Length\u003cbr\u003e- (8) 5\/8\" Heim Joints \u0026amp; jam nuts 4RH 4LH - Choose from plain steel or upgrade to heat treated 4130 Chromoly\u003cbr\u003e- (16) High Misalignment Spacers\u003cbr\u003e- CNC Engraved Logo\u003cbr\u003e- Available in raw (no finish) or black powdercoat\u003cbr\u003e\u003cspan\u003e- Lifetime Warranty on Rods (1 Year warranty on heims)\u003c\/span\u003e\u003cbr\u003e- Simple install with no modifications needed\u003cbr\u003e- Made with pride in the USA!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris models:\u003c\/strong\u003e\u003cbr\u003e- RZR XP900 (2011-2014)\u003cbr\u003e\u003cbr\u003e\u003cem\u003e\u003cstrong\u003eWhy do I need these rods?\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"BLACK","offer_id":51840939262253,"sku":"RR900CB","price":369.99,"currency_code":"USD","in_stock":false},{"title":"RAW","offer_id":51840939295021,"sku":"RR900","price":349.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/files\/7331.jpg?v=1771874904"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9040\/3885\/collections\/7331.jpg?v=1773844530","url":"https:\/\/50-caliber-racing-2.myshopify.com\/collections\/radius-rods.oembed","provider":"50 Caliber Racing","version":"1.0","type":"link"}